LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 832 (Propeller Shaft) >> Front Propeller Shaft >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Put matching marks on the front propeller shaft flange yoke and the front final drive companion flange as shown.
    CAUTION: For matching marks, use paint. Never damage the flange yoke and companion flange of the front final drive.
    Fig 1: Placing Matching Marks On Front Propeller Shaft Flange Yoke And Companion Flange
    G04901782
  2. Put matching marks on the front propeller shaft flange yoke and the transfer companion flange.
    CAUTION: For matching marks, use paint. Never damage the flange yoke and companion flange of the front final drive.
  3. Remove the bolts and then remove the front propeller shaft from the front final drive and transfer.
scientia non olet · About LEMON Manuals