LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Interior) >> Removal And Installation >> Body Side Trim >> Removal and Installation >> Front Pillar Upper Finisher

Front Pillar Upper Finisher

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Removal

  1. Remove the front pillar lower finisher. Refer to FRONT PILLAR LOWER FINISHER  procedure in this article.
  2. Remove the bolts, then front pillar assist grip.
  3. Remove the front pillar upper finisher bolt.
  4. Remove the front pillar upper finisher.

Installation

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals