LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1089 (Interior) >> Removal And Installation >> Body Side Trim >> Removal and Installation >> Front Pillar Lower Finisher

Front Pillar Lower Finisher

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Removal

  1. Partially remove the front door welt.
  2. Remove the front kick plate. Refer to KICK PLATES  procedure in this article.
  3. Release the clips, then remove the front pillar lower finisher.

Installation

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals