LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> On-Vehicle Repair >> Transmission Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal. Refer to "EXPLODED VIEW ".
  2. Remove air duct (inlet). Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect TCM harness connector (A).

    →: Vehicle front

  4. Remove TCM nuts and TCM (1) from bracket.
    Fig 1: Identifying TCM And Harness Connector
    G05875855Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals