LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1002 (Automatic Transmission (Re0F09B)) >> On-Vehicle Repair >> Secondary Speed Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal. Refer to "EXPLODED VIEW ".
  2. Remove hoodledge cover (LH).
  3. Remove engine room cover.
  4. Remove air duct (inlet). Refer to "REMOVAL AND INSTALLATION ".
  5. Remove air cleaner case. Refer to "REMOVAL AND INSTALLATION "
  6. Disconnect secondary speed sensor connector.
  7. Remove secondary speed sensor (1) and shim (2).
    CAUTION: Never lose the shim.
  8. Remove O-ring (3) from secondary speed sensor.
scientia non olet · About LEMON Manuals