LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Automatic Air Conditioner) >> In-Vehicle Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove lower driver instrument panel assembly. Refer to "DRIVER LOWER INSTRUMENT PANEL "
  2. Remove the in-vehicle sensor screw and then remove it.
    Fig 1: Identifying In-Vehicle Sensor
    G02162535Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals