LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 773 (Clutch System QG18DE) >> Operating Cylinder >> Installation

Operating Cylinder: Installation

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Install the components in the reverse order of removal. Adhere to the operations described below.

CAUTION: Install the hose without twisting it.
  • The copper washer of the union bolt should not be reused. Always use a new copper washer for installation.
  • After finishing the operation, bleed air from the clutch piping. Refer to BLEEDING PROCEDURE .
scientia non olet · About LEMON Manuals