LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Automatic Transmission Diagnosis - Re4F03 Series) >> Self-Diagnostic System >> Clearing Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 2002 Nissan Sentra, 2002 Infiniti G20, 2001 Nissan Sentra, and 2001 Infiniti G20. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure scan tool is properly connected. Select vehicle and engine selection menu (optional). Select year, engine, model and any additional information requested by scan tool.
  2. Turn ignition on. Select DIAGNOSTIC TROUBLE CODES. Select ERASE. All DTCs should now be cleared from ECM memory. If problem has not been corrected or fault is still present, DTC will be reset in ECM memory.
scientia non olet · About LEMON Manuals