LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Automatic Transmission Diagnosis - Re4F03 Series) >> Component Tests >> Shift Solenoid Valve "A" >> Resistance Check

Resistance Check

WARNING: This page is about a different car, the 2002 Nissan Sentra, 2002 Infiniti G20, 2001 Nissan Sentra, and 2001 Infiniti G20. However, it is still accessible from the selected car via links, so may be relevant.

Measure resistance of shift solenoid valve "A" between transaxle harness connector terminal No. 2 and ground. See Figure. Resistance should be 20-30 ohms. If resistance is not as specified, replace solenoid valve.