DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC confirmation test has been previously performed, always turn ignition off and wait at least 10 seconds before performing next DTC confirmation test.
- Turn ignition on. Wait at least 1 second.
- Select DATA MONITOR with scan tool.
- Start engine and let idle for 1 second.
- Turn ignition off, wait at least 10 seconds and turn ignition on.
- Repeat steps 3 and 4, 4 times.
- If first trip DTC is detected, go to DIAGNOSTIC PROCEDURE .