Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal noting the following:

Apply brake grease to the contact areas shown. Refer to "RECOMMENDED FLUIDS AND LUBRICANTS ".

Fig 1: Applying Brake Grease To Contact Areas
Courtesy of NISSAN MOTOR CO., U.S.A.
Install the parking brake shoe springs as shown.

Fig 2: Installing Parking Brake Shoe Springs
Courtesy of NISSAN MOTOR CO., U.S.A.

The orientation of the adjuster is different from left to right. Assemble the adjuster so that the threaded part is expanded when rotating it to the direction as shown. Completely retract the adjuster to assemble. When disassembling the adjuster, apply brake grease to the threads.
After installing parking brake shoes and rotor, adjust the parking brake. Refer to "SHOE CLEARANCE ".

Fig 3: Identifying Parking Brake

Courtesy of NISSAN MOTOR CO., U.S.A.