Trouble Diagnoses Symptom Chart (With Front and Rear Power Window Anti-pinch System)

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Check that other systems using the signal of the following systems operate normally.

FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM

Symptom	Repair order	Refer to page
None of the power windows can be operated using any switch	1. BCM power supply and ground circuit check	BCM POWER SUPPLY AND GROUND CIRCUIT CHECK
	2. Main power window and door lock/unlock switch power supply and ground circuit check	MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH POWER SUPPLY CIRCUIT CHECK SYSTEM
	3. Power window serial link check	POWER WINDOW SERIAL LINK CHECK FRONT LH AND RH
Front power window LH alone does not operate	1. Front power window motor LH circuit check	FRONT POWER WINDOW MOTOR LH CIRCUIT CHECK
Front power window LH alone does not operate	2. Replace main power window and door lock/unlock switch	DOOR FINISHER
Front power window RH alone does not operate	1. Front power window switch RH power and ground circuit check	POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH POWER SUPPLY AND GROUND CIRCUIT CHECK
	2. Power window serial link check	POWER WINDOW SERIAL LINK CHECK FRONT LH AND RH
	3. Front power window motor RH circuit check	FRONT POWER WINDOW MOTOR RH CIRCUIT CHECK
	4. Replace BCM	REMOVAL AND INSTALLATION
Rear power window LH alone does not operate	1. Rear power window switch LH or RH power and ground circuit check	REAR POWER WINDOW SWITCH LH OR RH POWER SUPPLY AND GROUND CIRCUIT CHECK (WITH FRONT LEFT AND RIGHT ONLY POWER WINDOW ANTI-PINCH SYSTEM)
	2. Rear power window motor LH circuit check	REAR POWER WINDOW MOTOR LH CIRCUIT CHECK (WITH FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM)
	3. Power window serial link check	POWER WINDOW SERIAL LINK CHECK REAR LH OR RH (WITH FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM)
	4. Replace rear power window switch LH	REAR DOOR
Rear power window RH alone does not operate	1. Rear power window switch LH or RH power and ground circuit check	REAR POWER WINDOW SWITCH LH OR RH POWER SUPPLY AND GROUND CIRCUIT CHECK (WITH FRONT LEFT AND RIGHT ONLY POWER WINDOW ANTI-PINCH SYSTEM)
	2. Rear power window motor RH circuit check	REAR POWER WINDOW MOTOR RH CIRCUIT CHECK (WITH FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM)
	3. Power window serial link check	POWER WINDOW SERIAL LINK CHECK REAR LH OR RH (WITH FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM)
	4. Replace rear power window switch RH	REAR DOOR
Anti-pinch system does not operate normally (Front LH)	Door window sliding part malfunction A foreign material adheres to window glass or glass run rubber. Glass run rubber wear or deformation. Sash is tilted too much, or not enough.	-
	2. Limit switch adjusting	SETTING OF LIMIT SWITCH
	3. Limit switch circuit check front LH	LIMIT SWITCH CIRCUIT CHECK FRONT LH
	4. Encoder circuit check front LH	ENCODER CIRCUIT CHECK FRONT LH
Anti-pinch system does not operate normally (Front RH)	Door window sliding part malfunction A foreign material adheres to window glass or glass run rubber. Glass run rubber wear or deformation. Sash is tilted too much, or not enough.	-
	2. Limit switch adjusting	SETTING OF LIMIT SWITCH
	3. Limit switch circuit check front RH	LIMIT SWITCH CIRCUIT CHECK FRONT LH
	4. Encoder circuit check front RH	ENCODER CIRCUIT CHECK FRONT RH
Anti-pinch system does not operate normally (Rear LH or RH)	Door window sliding part malfunction A foreign material adheres to window glass or glass run rubber. Glass run rubber wear or deformation. Sash is tilted too much, or no enough.	-
	2. Limit switch adjusting	SETTING OF LIMIT SWITCH
	3. Limit switch circuit check (rear LH or RH)	LIMIT SWITCH CIRCUIT CHECK REAR LH AND RH (WITH FRONT AND REAR ANTI-PINCH SYSTEM)
	4. Encoder circuit check (rear LH or RH)	ENCODER CIRCUIT CHECK REAR LH OR RH (WITH FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM)
Power window retained power operation does not operate properly	1. Check the retained power operation mode setting	ACTIVE TEST
	2. Door switch check	DOOR SWITCH CHECK
	3. Replace BCM	REMOVAL AND INSTALLATION
Does not operate by front door lock assembly LH (key cylinder switch)	1. Front door lock assembly LH (key cylinder switch) check	FRONT DOOR LOCK ASSEMBLY LH (KEY CYLINDER SWITCH) CHECK
	2. Replace main power window and door lock/unlock switch	DOOR FINISHER
Power window lock switch does not function	1. Power window lock switch circuit check	SCHEMATIC (WITH FRONT AND REAR POWER WINDOW ANTI-PINCH SYSTEM)