DTC Confirmation Test "B" & "C"
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Malfunction is detected when IACV-AAC valve does not operate properly. Possible causes are:
- IACV-AAC valve circuit shorted.
- Air control valve (power steering).
- Defective IACV-AAC valve.
Open hood. Start engine and warm to normal operating temperature. Turn ignition off and wait at least 10 seconds. Turn ignition on. Using scan tool, select DATA MONITOR. Start engine and let idle for at least one minute. If first trip DTC is set, perform DIAGNOSTIC PROCEDURE . If first trip DTC is not set, problem may be intermittent. See TESTING PROCEDURE under SELF-DIAGNOSTIC SYSTEM.