LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2033 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> Wheel >> Inspection

Section 2033 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)): Wheel: Inspection

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel and tire using power tool.
  2. Check tires for wear and improper inflation.
    Fig 1: Checking Lateral And Radial Runout Using Dial Gauge Indicator
    G04876560
  3. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
    1. Remove tire from wheel and mount wheel on a tire balance machine.
    2. Set dial indicator as shown in the illustration. Refer to "ROAD WHEEL ".
  4. Check front wheel bearings for looseness.
  5. Check front suspension for looseness.
  6. Install wheel and tire. Refer to "ROTATION ".
scientia non olet · About LEMON Manuals