How to Proceed With Trouble Diagnosis
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Confirm the symptom or customer complaint.
- Understand operation description and function description. Refer to , "SYSTEM DESCRIPTION ".
- Perform the preliminary check. Refer to , "PRELIMINARY CHECK ".
- Start engine.
- Select "METER A/C AMP" on CONSULT-II, and perform self-diagnosis of unified meter and A/C amp. Refer to CONSULT-II FUNCTION . When no malfunction is detected, go to step 5. When malfunction is detected, go to DISPLAY ITEM LIST .
- After erasing the self-diagnostic results, perform self-diagnosis again. When no malfunction is detected, go to SYMPTOM CHART 2 .
- Check symptom and repair or replace the cause of malfunction.
- Does the warning chime operate properly? If so, go to 7 . If not, go to 5 .
- INSPECTION END.