Display Item List
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY ITEM LIST
| CONSULT-II display | Malfunction |
|---|---|
| CAN COMM CIRC [U1000] | Malfunction is detected in CAN communication lines.
CAUTION:
Even when there is no malfunction on CAN communication system, malfunction may be misinterpreted when battery has low voltage (when maintaining 7V-8V for about 2 seconds) or 10A fuse [No. 19, located in the Fuse Block (J/B)] is removed.
|
| METER COMM CIRC [B2202] | Malfunction is detected in communication lines between combination meter and unified meter and A/C amp. |
| VEHICLE SPEED CIRC [B2205] | Malfunction is detected when an erroneous speed signal is input.
CAUTION:
Even when there is no malfunction on speed signal system, malfunctions may be misinterpreted when battery has low voltage (when maintaining 7V-8V for about 2 seconds).
|
Time indicates the condition of the self-diagnosis results judged by each signal input.
- Normal: If the system is presently operating properly, but had a malfunction in the past, the time will indicate "1-63".
- Malfunction: Soon after detecting malfunctions by self-diagnoses or current malfunction, "0" is indicated.
After the system returns to normal operating condition, every time the ignition switch is cycled (turned to OFF from ON), a value of one is added to the counter (i.e. "1" --> "2"-->"3"... "63"). When the ignition switch is cycled 64 times, the result of the self-diagnoses will be erased. If a malfunction is detected again, "0" will be indicated.