LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Stoplight Switch & Automatic Speed Control Device Switch

Stoplight Switch & Automatic Speed Control Device Switch

  1. Both switches are located below dash panel, at brake pedal bracket. Adjust brake pedal height. See BRAKE PEDAL HEIGHT  and BRAKE PEDAL FREE PLAY  .
  2. To adjust clearance, twist and pull to remove switch. Pull up and hold brake pedal.
  3. Insert switch into retainer until plunger is completely depressed. Turn switch until it locks into place in the brake pedal bracket.
    NOTE: When turning switches to lock into place, the switch backs off the stopper to the correct clearance automatically.
  4. Release the brake pedal. Ensure stoplights go off when brake pedal is released.
scientia non olet · About LEMON Manuals