LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2024 >> Eclipse Cross SEL >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Warning (BSW)/Rear Cross Traffic Alert (RCTA) >> Trouble Symptom Procedures >> Inspection Procedure 2: Power supply to the BSW-ECU (slave) fails [Cannot communicate with BSW-ECU (slave) using the scan tool (M.U.T.-IIISE).] >> Comments On Trouble Symptom

Comments On Trouble Symptom

BSW-ECU (slave) is communicating with scan tool (M.U.T.-IIISE) via CAN. Therefore, communication error of BSW-ECU (slave) is suspected.

NOTE: Check whether the BSW-ECU (master) sets DTC C2332. Then follow this diagnosis.
scientia non olet · About LEMON Manuals