| Power supply to the BSW-ECU (master) fails [Cannot communicate with BSW-ECU (master) using the scan tool (M.U.T.-IIISE).] |
1 |
| Power supply to the BSW-ECU (slave) fails [Cannot communicate with BSW-ECU (slave) using the scan tool (M.U.T.-IIISE).] |
2 |
| The system is not turned on and off by changing the BSW setting. |
3 |
| Although no vehicle is present within a detection area, the blind spot warning light on door mirror illuminates. (illuminates incorrectly) |
4 |
| Although any vehicle is present within a detection area, the blind spot warning light on door mirror does not illuminate. (the system is on) |
5 |