LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2021 >> RVR ES, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter - (With Diagnostics) >> On-Vehicle Service >> Service Reminder Function Set >> How To Operate The Scan Tool MB991958

How To Operate The Scan Tool MB991958

CAUTION: Before setting, if the combination meter does not start measuring the elapsed time, turn the ignition switch to the ON position while pressing the meter information switch to start a measurement.
  1. Connect the scan tool MB991958 to the data link connector.
  2. Start the scan tool system on the PC and turn the ignition switch to the "ON" position.
  3. Select "Meter" on the "System Select" screen, and press the "OK" button.
  4. Select "Special Function" on the next screen.
  5. Select "Service Reminder" on the "Special function" screen.
  6. Select the function to be executed from "Function List."
    1. Reminder reset (Indicator off) (Refer to HOW TO OPERATE THE SCAN TOOL MB991958  ).
    2. Next schedule reminder cancel (Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  ).
    3. Extra reminder setting (Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  ).
    4. Extra reminder cancel (Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  ).
    5. Periodic reminder schedule set (Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  ).
    6. Integrated value adjustment (Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  ).
    7. Optional INT schedule setting (Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  ).
G13347576Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. REMINDER RESET (INDICATOR OFF)
    CAUTION:
    • Be careful not to execute "1 Reminder reset (Indicator off)" again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
    • If the next warning period is cancelled by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.

    The service reminder warning indicator which is currently output can be cancelled.

    NOTE: In addition to the operation of the scan tool MB991958, the service reminder warning indicator can be cancelled by operating the meter information switch on the combination meter. Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  .
    1. On the "Service Reminder" screen, select "1 Reminder reset (Indicator off)."
      NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "0 mile." and "0 month."
    2. Press the "OK" button.
      G13347577Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    3. The current warning indicator is cancelled, and the next warning period is displayed.
    NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "7, 500 mile" and "6 month."
    G13347578Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. NEXT SCHEDULE REMINDER CANCEL
    CAUTION: If the next warning period is cancelled by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.

    The next warning period is cancelled, and its following warning period can be set.

    1. On the "Service Reminder" screen, select "2 Next schedule reminder cancel."
      NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "1, 000 mile" and "1 month."
    2. Press the "OK" button.
      G13347579Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    3. The next warning period is cancelled, and its following warning period is set.
      NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is changed to "8, 500 mile" and "7 month."
      G13347580Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. EXTRA REMINDER SETTING

    In addition to the current warning period, the temporary service reminder warning period can be set.

    1. On the "Service Reminder" screen, select "3 Extra reminder setting."
      NOTE: The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has not been set.
      G13347581Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    2. Set the temporary warning period (distance or month) of the "Set value."
      NOTE: Either input of distance or month can execute the setting.
    3. Press the "OK" button.
      G13347582Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    4. The temporary warning period is set.
      NOTE: The screen indicates that "2 month" has been added to the temporary warning period (No. 5 in the data list). (The distance of No. 4 in the data list has not been set).
      G13347583Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. EXTRA REMINDER CANCEL

    The temporary service reminder warning period which has been set can be cancelled.

    1. On the "Service Reminder" screen, select "4 Extra reminder cancel."
      NOTE: The screen indicates that "3000 mile" and "2 month" have been set to the temporary warning period (Nos. 4 and 5 in the data list).
    2. Press the "OK" button.
      G13347584Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    3. The temporary warning period is cancelled.
      NOTE: The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has been cancelled.
      G13347585Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. PERIODIC REMINDER SCHEDULE SET

    The service reminder schedule can be changed.

    NOTE: In addition to the operation of the scan tool MB991958, the schedule can be changed by operating the meter information switch on the combination meter. Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH  .
    1. On the "Service Reminder" screen, select "5 Periodic reminder schedule set."
      NOTE: The screen indicates that the current schedule (No. 7 in the data list) has been set to "NAS 1-1."
      G13347586Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    2. Set the schedule to be changed from "Set value."
    3. Press the "OK" button.
      G13347587Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    4. The schedule is changed.
      NOTE: The screen indicates that the current schedule (No. 7 in the data list) has been changed to "NAS 1-2."
      G13347588Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. INTEGRATED VALUE ADJUSTMENT

    At the combination meter replacement or for the vehicle with its battery being removed for a long period (15 days or more), this adjustment is used to reset the mileage and elapsed days for check warning.

    1. On the "Service Reminder" screen, select "6 Integrated value adjustment."
      NOTE: The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) are "26 mile" and "0 day."
      G13347589Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    2. To "Set value," input the mileage and elapsed days to be reset.
      NOTE: Always input both the mileage and elapsed days.
    3. Press the "OK" button.
      G13347590Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
      G13347591Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    4. The mileage and elapsed days are changed. The combination meter automatically recalculates the distance and days to the nearest next check from the settings of mileage and elapsed days for check warning, and then displays them in "Data List."
      NOTE:
      • The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) have been changed to "100 mile" and "30 day."
      • Set the elapsed days for check warning to "0 day" by the above resetting method, thereby the timer is reset indirectly.
  7. OPTIONAL INT SCHEDULE SETTING
    CAUTION: If the current schedule is set to the "Optional INT" by executing "5. Periodic reminder schedule set," the "set value" cannot be input. Therefore, set it to the schedule other than the "Optional INT" once, and then execute "7. Optional INT schedule setting."

    In addition to the existing schedule, the optional service reminder schedule can be set.

    1. On the "Service Reminder" screen, select "7 Optional INT schedule setting."
      NOTE: The screen indicates that the optional schedule (Nos. 12 and 13 in the data list) has not been set.
      G13347592Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    2. Set the optional schedule (distance or month) of the "Set value."
      NOTE: Either input of distance or month can execute the setting.
    3. Press the "OK" button.
      G13256017Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    4. The optional schedule is set. The set schedule becomes effective by executing "5 Periodic reminder schedule set" and setting the schedule to "Optional INT."
      NOTE: The screen indicates that "2 month" has been added to the optional schedule (No. 13 in the data list). (The distance of No. 12 in the data list has not been set).
      G13256018Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals