Fuel Level Sensor Float Height
- Remove the fuel pump module (Refer to ON-VEHICLE SERVICE <Main>, FUEL LEVEL SENSOR (SUB) REPLACEMENT <AWD> <Sub>).
- When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.
<FWD> Standard value:
| Float position | Float height {mm (in)} |
|---|---|
| Stopper position "F" (height A) | 201.6 (7.9) |
| Stopper position "E" (height B) | 18.0 (0.7) |
<AWD> Standard value:
| Float position | Float height {mm (in)} | |
|---|---|---|
| Main | Sub | |
| Stopper position "F" (height A) | 166.2 (6.5) | 48.8 ± 3.0 (1.9 ± 0.1) |
| Stopper position "E" (height B) | 38.8 (1.5) | 238.0 ± 3.0 (9.4 ± 0.1) |