Actuator Test
| Item No. | Item name | Test item | Driven content |
|---|---|---|---|
| 1* | Speedometer | Pointer setting (-) | Value that is set with scan tool is shown on the combination meter. |
| 2 | Tachometer | Pointer setting (r/min) | |
| 3 | Fuel gauge | Status setting (ohm) | |
| 5 | Meter illumination | Status setting (%) | |
| 7 | Indicator1 | By turning ON/OFF the item values, indicators can be illuminated/extinguished and tone alarm can be sounded. | ON (illuminated)/OFF (extinguished) |
| 8 | Indicator2 | ||
| 9 | Indicator3 | ||
| 10 | Indicator4 |
NOTE:
Depending on the main scale of the speedometer, the unit that can be tested changes. Unit is displayed as on the scan tool screen.