| Trouble in HUD power supply system (Communication with the scan tool (M.U.T.-IIISE) is not possible.) |
1 |
|
| The combiner does not work, open or close normally even if combiner open/close switch is operated. |
2 |
|
| The position of the combiner display area cannot be adjusted even if the angle adjustment switch is operated. |
3 |
|
| The position of the combiner display area cannot be adjusted even if the angle adjustment switch is operated. |
4 |
|
| Nothing is displayed in the combiner display area (HUD can be activated.) |
5 |
|
| Part of information is not displayed correctly in the combiner display area (HUD can be activated.) |
6 |
|
| Auto light control function does not work. |
7 |
|
| Brightness decreases. |
8 |
|