Diagnostic Trouble Code Chart
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), DTC(s) associated with other system may be set. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
| DTC No. | Diagnostic item | Reference |
|---|---|---|
| B2550 | HUD ECU internal error | |
| B2552 | Internal temperature sensor | |
| B2555 | Display OPEN/CLOSE switch | |
| B2556 | Operation switch | |
| U0141 | ETACS CAN timeout | |
| U0155 | Meter CAN timeout | |
| U1190 | No receive fault detect signal | |
| U1195 | Coding not completed |