Data List Reference Table
The following items of the ECU input data can be read using scan tool (M.U.T.-IIISE).
| Item No. | scan tool (M.U.T.-II-ISE) display | Check condition | Normal condition |
|---|---|---|---|
| 1 | HUD SW | When the HUD ON/OFF switch is not operated. | OFF |
| When the HUD ON/OFF switch is operated. | ON | ||
| 2 | Brightness SW(UP) | When the brightness switch (+) is not operated. | OFF |
| When the brightness switch (+) is operated. | ON | ||
| 3 | Brightness SW(DOWN) | When the brightness switch (-) is not operated. | OFF |
| When the brightness switch (-) is operated. | ON | ||
| 4 | Angle SW(UP) | When the angle switch (UP) is not operated. | OFF |
| When the angle switch (UP) is operated. | ON | ||
| 5 | Angle SW(DOWN) | When the angle switch (DOWN) is not operated. | OFF |
| When the angle switch (DOWN) is operated. | ON | ||
| 6 | Power supply voltage | Always | Battery positive voltage |