LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Manual Transaxle Overhaul) >> Transaxle Case >> Disassembly And Assembly >> Assembly Service Points >> >> C << Tapered Roller Bearing Outer Race Installation

>> C << Tapered Roller Bearing Outer Race Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set special tools MB991015 and MB990938.
    Fig 1: Identifying Special Tools MB991015 And MB990938
    G05375714Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Press-fit the tapered roller bearing outer race to the height shown in the illustration.
    Fig 2: Identifying Roller Bearing Outer Race Dimension
    G05375715Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals