LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (5 Of 6)) >> Diagnosis < Active Center Differential (ACD) > >> Diagnostic Trouble Code Procedures >> DTC C2205: Steering Wheel Sensor System (Internal Error) >> Diagnosis

DTC C2205: Steering Wheel Sensor System (Internal Error): Diagnosis

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. STEP 1. Scan tool CAN bus diagnostics 

    Using scan tool MB991958, diagnose the CAN bus lines.

    Q: Is the check result normal? 

    1. YES:  Go to  Step 3.
    2. NO:  Repair the CAN bus lines. (Refer to TROUBLESHOOTING ). After repairing the CAN bus line, go to Step 2.
  2. STEP 2. Check whether the DTC is reset. 

    Q: Is DTC No. C2205 set? 

    1. YES:  Go to Step 3.
    2. NO:  This diagnosis is complete.
  3. STEP 3. Scan tool data list 

    Item 13: Steering wheel sensor (Refer to DATA LIST REFERENCE TABLE  ).

    Q: Is the check result normal? 

    1. YES:  Go to Step 4.
    2. NO:  Replace the steering wheel sensor. (Refer to STEERING WHEEL SENSOR ). Then go to  Step 5.
  4. STEP 4. Check whether the DTC is reset. 

    Q: Is DTC No. C2205 set? 

    1. YES:  Replace the AWC-ECU. (Refer to AWC-ECU ). Then go to Step 5.
    2. NO:  Intermittent malfunction. (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).
  5. STEP 5. Check whether the DTC is reset. 

    Q: Is DTC No. C2205 set? 

    1. YES:  Return to  Step 1.
    2. NO:  This diagnosis is complete.
scientia non olet · About LEMON Manuals