LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) - With Diagnostics - Lancer (5 Of 6)) >> Diagnosis < Active Center Differential (ACD) > >> Diagnostic Trouble Code Procedures >> DTC C2203: VIN not Recorded >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. STEP 1. Scan tool CAN bus diagnostics 

    Using scan tool MB991958, diagnose the CAN bus lines.

    Q: Is the check result normal? 

    1. YES:  Go to Step 2.
    2. NO:  Repair the CAN bus lines. (Refer to TROUBLESHOOTING ). After repairing the CAN bus line, go to Step 2.
  2. STEP 2. Scan tool diagnostic trouble code 

    Check whether engine-related diagnostic trouble code No. P0630 is set. (Refer to DIAGNOSTIC TROUBLE CODE TABLE ).

    Q: Is the DTC set? 

    1. YES:  Perform the relevant troubleshooting.
    2. NO:  Go to Step 3.
  3. STEP 3. Check whether the DTC is reset. 

    Q: Is DTC No. C2203 set? 

    1. YES:  Replace the AWC-ECU. (Refer to AWC-ECU ). Then go to Step 4.
    2. NO:  Intermittent malfunction. (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).
  4. STEP 4. Check whether the DTC is reset. 

    Q: Is DTC No. C2203 set? 

    1. YES:  Return to  Step 1.
    2. NO:  This diagnosis is complete.
scientia non olet · About LEMON Manuals