LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Headlight System - With Diagnostics - Lancer) >> Symptom Procedures >> Inspection Procedure 6: High-beam indicator light does not illuminate normally >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If the high-beam indicator does not illuminate normally, the harness in the CAN bus lines, connector(s), ETACS-ECU, or combination meter may have a problem.

scientia non olet · About LEMON Manuals