LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Headlight System - With Diagnostics - Lancer) >> Service Precautions (Discharge Headlight) >> Checking Procedure For Discharge Headlight Related Parts (Inspection Procedure When Reusing The Controller) >> 1 - 1 Visual Check Of Controller (Case)

1 - 1 Visual Check Of Controller (Case)

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If any of the check items below are found, replace the controller.

Items to be checked Why the controller should be replaced
Obvious deformation (warping, twisting, dents, nicks, chipped edges) of controller case The printed circuit board or the element(s) may be cracked
Damaged connector (chipped or cracked plastics, or deformed terminal) The damaged part(s) may cause poor connection or short circuit.