LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Headlight System - With Diagnostics - Lancer) >> Inspection >> Bracket Repair Of Headlight Assembly >> Repair Procedure Of Bracket A

Repair Procedure Of Bracket A

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cut the damaged bracket A so that it has the larger dimension than the dimension shown in the figure from the mounting boss seating face.
  2. Smoothen the bracket cut surface using the sandpaper.
    Fig 1: Identifying Damaged Bracket A
    G09630063Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Bracket Dimension From Mounting Boss Seating Face
    G09630064Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Fix the repair bracket A to the headlight assembly using the tapping screw.
    Fig 3: Identifying Bracket A And Tapping Screw
    G09630065Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals