LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Controller Area Network (Can) - Lancer) >> Diagnosis >> Can-Related Connector Position

Can-Related Connector Position

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying CAN-Related Connector Position
G09630741Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Connector No. Connector name
A-03 ABS-ECU < Vehicles without ASC >
A-51 ASC-ECU < Vehicles with ASC >
A-54 Intermediate connector (Front wiring harness and control wiring harness combination) < RALLIART >
A-55 Joint connector (CAN4) < RALLIART >
B-109 Engine control module (ECM)
B-120 Transaxle assembly < RALLIART >
C-04 Combination meter
C-05 Joint connector (CAN2)
C-06 Joint connector (CAN1)
C-09 Wireless control module (WCM) < Vehicles with WCM >
C-22 Intermediate connector (Instrument panel wiring harness and floor wiring harness combination)
C-31 KOS-ECU < Vehicles with KOS >
C-34 Data link connector
C-35 Intermediate connector (Instrument panel wiring harness and floor wiring harness combination)
C-41 Transaxle control module (TCM) < CVT >
C-49 Shift lever < RALLIART >
C-51 AWC-ECU < RALLIART >
C-57 AWD-ECU < Electric controlled AWD >
C-122 SRS-ECU
C-124 Joint connector (CAN3)
C-127 Intermediate connector (Instrument panel wiring harness and front wiring harness combination)
C-141 Electric power steering-ECU < Vehicles with electric power steering >
C-146 A/C control panel < vehicles with A/C >
C-147 Heater control panel < vehicles without A/C >
C-211 Steering wheel sensor
C-301 ETACS-ECU
D-35 Front seat assembly (RH)
D-35-2 Occupant classification-ECU