LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Controller Area Network (Can) - Lancer) >> Diagnosis >> Can Bus Diagnostics >> DIAGNOSTIC ITEM 17: Diagnose the lines between joint connector (CAN3) and joint connector (CAN4) < RALLIART > >> Function

DIAGNOSTIC ITEM 17: Diagnose the lines between joint connector (CAN3) and joint connector (CAN4) < RALLIART >: Function

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If a failure is present in the wiring harness between the joint connector (CAN3) and the joint connector (CAN4), this diagnosis result will be set.

scientia non olet · About LEMON Manuals