LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> i-MiEV SE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter - With Diagnostics >> Diagnosis >> Check At Ecu Terminals

Check At Ecu Terminals

Fig 1: Combination Meter Terminal Layout (B-101)
G08297855Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Terminal No. Check item Check condition Normal condition
1 Battery power supply Always Battery positive voltage
2 Power supply to electric motor switch (IG1) Electric motor switch: ON Battery positive voltage
3 Illumination (power supply) Taillight switch: ON Battery positive voltage
4 - 6 - - -
7 AVAS indicator When the AVAS indicator is on 1 V or less
8 Seat belt warning light (Passenger's side) electric motor switch: ON and seat belt unfastened 1 V or less
9 Vehicle speed signal output Perform a test run of the vehicle. 0 to 12 V (pulse signal)
10 Ground Always 1 V or less
11 Ground Always 1 V or less
12, 13 - - -
14 Input of parking brake switch and brake fluid level switch
  • electric motor switch: ON and parking brake switch: ON
  • electric motor switch: ON and brake fluid level switch: ON
1 V or less
15 Supplemental restraint system (SRS) - air bag Electric motor switch: ON 7 V or more (when warning light is on), 1 V or less (when warning light is off)
16 - - -
17 CAN H - -
18 CAN L - -