Actuator Test Table
CAUTION:
Perform the actuator test of the speedometer. Value displayed on the combination meter will be slightly higher than input by the scan tool MB991958. (due to tolerance of the speedometer display.)
| Item No. |
Item name |
Test item |
Driven content or unit |
| 01 |
Speedometer |
Status setting |
Value that is set with scan tool NB991958 is shown on the combination meter. |
| 05 |
Meter illumination |
Status setting |
OFF |
| Step 1 |
| Step 2 |
| Step 3 |
| Step 4 |
| 07 |
Indicator 1 |
ABS indicator, Door indicator, High beam indicator, Brake indicator, Charge indicator, EPS indicator, Front fog lamp indicator, Seatbelt indicator, SRS indicator, Turn signal indicator (RH), Turn signal indicator (LH) |
OFF / ON |
| 8 |
Indicator 2 |
Service reminder indicator |
OFF / ON |
| 9 |
Indicator 3 |
Position light indicator |
OFF / ON |
| 10 |
Indicator 4 |
F.A.S.T. indicator |
OFF / ON |