Idle-Up Operation Check
Before inspection and adjustment, set vehicle in the following condition:
- Engine coolant temperature: 80 - 90°C (176.0 - 194.0°F)
- Lights, electric cooling fan and accessories: OFF
- Transmission: Neutral ("N" or "P" position)
- Steering wheel: Straightforward
- Check whether or not the idle speed is the standard value. Refer to On-vehicle Service - Idle Speed Check:
Refer to CURB IDLE SPEED CHECK < 2.0L ENGINE Non-turbo >.
Refer to CURB IDLE SPEED CHECK < 2.0L ENGINE Turbo >.
Refer to CURB IDLE SPEED CHECK < 2.4L ENGINE >.
Standard value: 700 ± 100 r/min < Except 2.4L ENGINE >
Standard value: 650 ± 100 r/min < 2.4L ENGINE >
- Turn on the air conditioning switch and the blower speed selection dial. Engine idling speed should be within the standard value:
Standard value: 750 ± 50 r/min < 2.0L ENGINE Non-turbo >
Standard value: 800 ± 50 r/min < 2.0L ENGINE Turbo >
Standard value: 800 ± 50 r/min < 2.4L ENGINE >
NOTE: It is not necessary to make an adjustment, because the idling speed is automatically adjusted by the ISC system. If, however, a deviation from the standard value occurs for some reason, check the ISC system:Refer to CURB IDLE SPEED CHECK < 2.0L ENGINE Non-turbo >.
Refer to CURB IDLE SPEED CHECK < 2.0L ENGINE Turbo >.
Refer to CURB IDLE SPEED CHECK < 2.4L ENGINE >.