LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Twin Clutch SPORTRONIC Shift Transmission (TC-SST) Overhaul - Lancer) >> Transaxle >> Disassembly And Reassembly >> Removal Service Points >> << F >> Manual Control Shaft Removal

<< F >> Manual Control Shaft Removal

WARNING: This page is about a different variant/trim than selected.
  1. Move the park manual outer lever from D in clock direction to the service position as shown in the illustration.
    Fig 1: Locating Park Manual Outer Lever
    G06471488Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Remove the plug.
    Fig 2: Identifying Plug
    G06471489Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. When removing the screw located behind the plug, pay attention to the screw not to fall in the transaxle case.
  4. Remove the manual control shaft carefully.
    Fig 3: Identifying Transaxle Case
    G06471490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals