LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Twin Clutch SPORTRONIC Shift Transmission (TC-SST) Overhaul - Lancer) >> Transaxle >> Disassembly And Reassembly >> Removal Service Points >> << B >> Seal Cover Bracket/Seal Cover Removal

<< B >> Seal Cover Bracket/Seal Cover Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the seal cover bracket.
    CAUTION:
    • Before removing the seal cover, securely remove metal debris including dusts by air spray.
    • Before removing the seal cover, use the ladder sheet and so forth for the supporting point not to damage the clutching housing.
  2. Remove the seal cover from the transaxle, using the tool such as crowbar.
    Fig 1: Removing Seal Cover From Transaxle Using Tool
    G06471537Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals