>> D << Throttle Body Gasket/Throttle Body Installation
WARNING: This page is about a different variant/trim than selected.
- Make sure that the throttle body gasket is placed before installing the throttle body.
- Temporarily tighten throttle body and throttle body stay mounting bolts at A and B in the illustration.
- Tighten the throttle body mounting bolt at illustrated position A to the specified torque.
Tightening torque: 20 ± 2 N.m (15 ± 1 ft-lb)
- Tighten the throttle body mounting bolts at illustrated position B to the specified tightening torque.
Tightening torque: 9.5 ± 2.5 N.m (84 ± 22 in-lb)