LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Overhaul - 2.4L - Lancer) >> Sealants >> Cleaning Of Gasket Surface

Cleaning Of Gasket Surface

WARNING: This page is about a different variant/trim than selected.

Completely remove all deposits from the gasket surface with a gasket scraper or wire brush. Make sure that the surface to which FIPG is applied is smooth. The gasket surface must be free from grease and foreign substances. Be sure to remove old FIPG that has entered mounting holes and screw holes.

scientia non olet · About LEMON Manuals