LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Overhaul - 2.4L - Lancer) >> Oil Pan And Timing Chain Case >> Removal And Installation >> Removal Service Points >> << B >> Oil Pan Removal

<< B >> Oil Pan Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove oil pan tightening bolts.
    CAUTION: Lightly tap the oil pan FIPG cutter to drive in, taking care not to damage the ladder frame and oil pan sealed area.
  2. Lightly tap special tool oil pan FIPG cutter (MD998727) to drive in the illustrated groove of the oil pan and ladder frame.
    Fig 1: Identifying Groove On Oil Pan And Ladder Frame
    G05374266Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Lightly tap and slide special tool MD998727 to remove the oil pan.
    Fig 2: Removing Oil Pan By Tapping/Sliding Special Tool MD998727
    G05374267Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals