General Specifications
WARNING: This page is about a different variant/trim than selected.
| Item | Specifications | ||
|---|---|---|---|
| Engine model | 4B12 | ||
| Bore x stroke mm (in) | 88.0 (3.46) x 97.0 (3.82) | ||
| Total displacement cm3 (cu in) | 2,359 (143.9) | ||
| Combustion chamber | Pent-roof type | ||
| Number of cylinders | 4 | ||
| Valve mechanism | Type | DOHC | |
| Intake valve | 8 | ||
| Exhaust valve | 8 | ||
| Compression ratio | 10.5 | ||
| Valve timing | Intake valve | Opens | 40°BTDC - 0°BTDC |
| Closes | 64°ABDC - 24°ABDC | ||
| Exhaust valve | Opens | 24°BBDC - 44°BBDC | |
| Closes | 0°ATDC - 20°ATDC | ||
| Fuel injection system type | Electronic control MPI | ||
| Ignition system type | Electronic spark-advance control type (4-coil type) | ||
| Generator type | Alternating current system (with built-in IC regulator) | ||
| Starter motor type | Reduction drive type | ||