LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Overhaul - 2.4L - Lancer) >> Cylinder Head And Valves >> Removal And Installation >> Installation Service Points >> >> B << Retainer Lock Installation

>> B << Retainer Lock Installation

WARNING: This page is about a different variant/trim than selected.

Use a special tool MD998735, and MB992089 to compress the valve spring and to install the retainer lock.

Fig 1: Compressing Valve Spring Using Special Tool MD998735 And MB992089
G05374310Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals