LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Overhaul - 2.4L - Lancer) >> Balancer Chain >> Removal And Installation >> Removal Service Points >> << A >> Drive Plate Bolt Removal

<< A >> Drive Plate Bolt Removal

WARNING: This page is about a different variant/trim than selected.
  1. Use special tool MB991883 to secure the drive plate.
  2. Remove the drive plate bolts.
    Fig 1: Securing Drive Plate Using Special Tool MB991883
    G05374238Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals