LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Overhaul - 2.0L Turbo - Lancer) >> Oil Pump Chain >> Removal And Installation >> Installation Service Points >> >> C << Oil Pump Sprocket/Oil Pump Chain Installation

>> C << Oil Pump Sprocket/Oil Pump Chain Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set the No. 1 piston at top dead center on the compression stroke.
  2. Using the special tool MB991346, install the oil pump sprocket to the oil pump case.
  3. Install the oil pump chain to the crankshaft sprocket.
  4. Install the oil pump chain to the oil pump sprocket.
    Fig 1: Installing Oil Pump Sprocket Using Special Tool MB991346
    G05392608Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals