LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Overhaul - 2.0L Turbo - Lancer) >> Oil Pan And Timing Chain Case >> Removal And Installation >> Installation Service Points >> >> B << Front Oil Seal Installation

>> B << Front Oil Seal Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply engine oil to the internal circumference of the oil seal.
  2. Use special tool MB991448 to install the front oil seal on the timing chain case.
    Fig 1: Installing Front Oil Seal On Timing Chain Case Special Tool MB991448
    G05898750Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals