LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Overhaul - 2.0L Turbo - Lancer) >> Intake Manifold And Fuel System >> Removal And Installation >> Installation Service Points >> >> F << Fuel Rail Assembly Installation

>> F << Fuel Rail Assembly Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply gasoline to the pressure side O-ring of the injector.
  2. Tighten the fuel rail assembly to the intake manifold to the specified torque.

    Specified torque: 12 ± 3 N.m (106 ± 26 in-lb) 

scientia non olet · About LEMON Manuals