>> D << Crankshaft Bearing Lower Installation
WARNING: This page is about a different variant/trim than selected.
- When replacing the crankshaft bearing lower, select a bearing with the size corresponding to the crankshaft journal diameter in the table below.
- The crankshaft bearing lower has an identification color at the illustrated position.
- Install the selected crankshaft bearing lower.
| Cylinder block | Crankshaft bearing | |||
|---|---|---|---|---|
| Identification mark | Journal diameter mm (in) | Identification color | ||
| No. 1, 2, 4, 5 | No. 3 | No. 1, 2, 4, 5 | No. 3 | |
| 0 | 8 | 51.985 - 51.988 (2.0467 - 2.0468) | Red | Brown |
| 1 | 9 | 51.982 - 51.985 (2.0465 - 2.0467) | Black | Yellow |
| 2 | 0 | 51.979 - 51.982 (2.0464 - 2.0465) | None | Red |
| 3 | 1 | 51.976 - 51.979 (2.0463 - 2.0464) | Green | Black |
| 4 | 2 | 51.973 - 51.976 (2.0462 - 2.0463) | Blue | None |