>> C << Crankshaft Bearing Upper Installation
WARNING: This page is about a different variant/trim than selected.
- When replacing the crankshaft bearing upper, select a bearing with the size corresponding to the crankshaft journal diameter in the table below.
- The crankshaft bearing upper has an identification color at the illustrated position.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Cylinder block Crankshaft bearing Identification mark Journal diameter mm (in) Identification color No. 1, 2, 4, 5 No. 3 No. 1, 2, 4, 5 No. 3 1 0 56.000 - 56.006 (2.2047 - 2.2050) Black Red 2 1 56.006 - 56.012 (2.2050 - 2.2052) None Black - Install the selected crankshaft bearing upper.