LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Overhaul - 2.0L Turbo - Lancer) >> Crankshaft And Cylinder Block >> Removal And Installation >> Installation Service Points >> >> A << Crankshaft Sensing Ring Installation

>> A << Crankshaft Sensing Ring Installation

WARNING: This page is about a different variant/trim than selected.

Tighten crankshaft sensing ring bolts to the specified torque in the tightening order shown in the illustration.

Specified torque: 11 ± 1 N.m (98 ± 8 in-lb) 

Fig 1: Identifying Crankshaft Sensing Ring Bolt Tightening Sequence
G05374368Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals